Denier ye 35d kuya ku 500d, ngeElongation % Min-Max:14-35. 80% ayikho ikhanda futhi 20% ikhanda elinye. Yenza impako yokuqala futhi yenza imibala. Ingenhla kakhulu futhi nezinhla eziningi.
Lo msebenzi wokubhala we-polyester ophakeme nangokukhulu kakhulu uyindlela yokuvumela amandla ngokukhulu noma kube yimali ngokukhanya kakhulu. Ispesifikhezolo ye-V69 (210d/3) inikeza amandla wokuvamisa kanye nekakhululwa, okwenza ukuba yisikwele kakhulu sokwenziwa kwamagatya nezindleke. Isenzo se-nylon sokubondwa kwenhance kakhulu ukukhanywa kanye nokunqamula ukungena kwezindleke, okungenzeka ukuthi kuzo zonke izindleke zingasebenze ngokuvamile. Yisikwele kakhulu kuwo wonke amachini okubhala amadolobha nezindleke zokubhala ezikhulu, lo msebenzi wokubhala wenza ukuba kune tension efanayo nekunyeleka ngokuvamile kusohloko sababili. Ukubhengwa kwalo kwenyelela ukubhala izindleke ngokukhanya kanye nokunciphisa ukugcina kwezindleke nezindleke ezimiswe. Noma kwenziwa amagatya, amathemba, amaphupha noma izinto ezikhulu eziningi, lo msebenzi wokubhala unikeza imiphumela efanayo nezindleke zokwenziwa ngokuphephile.
Igama lemikhiqizo |
I-thread le-Nylbond Tkt-40 |
Impahla |
Nayoni |
Ukucaciswa |
210D/3(Tex70 V69)
|
Isisindo |
275g |
Umbala |
imibala engu-240 yokukhetha |
Ukusetshenziswa |
ukubhala, Izinduku, Isitayela, Ukugcina lezinhlanzi... |
Izici (I-NE) |
Itheke thetshi |
Itheke thetshi |
Ububanzi |
Amandla Okudonsa |
Ukugcina ngemva kwe% |
Ubude (M) Okungeziwe Pansi (G) |
|||
150D/3 |
#60 |
Tex45 |
V30 |
0.25mm |
≥2.9 |
25-35% |
1800/100 |
||
210D/2 |
#60 |
Tex50 |
V46 |
0.24mm |
≥2.5 |
25-35% |
1900/100 |
||
210D/3 |
#40 |
Tex70 |
V69 |
0.32mm |
≥3.6 |
25-35% |
1250/100 |
||
250D/3 |
#30 |
Tex90 |
V92 |
0.35mm |
≥4.1 |
25-35% |
1050/100 |
||
420D/3 |
#20 |
Tex135 |
V138 |
0.45mm |
≥7 |
25-35% |
610/100 |
||
630D/3 |
#13/15 |
Tex210 |
V207 |
0.5mm |
≥11 |
25-35% |
420/100 |
||
840D/3 |
#10 |
Tex270 |
V277 |
0.6mm |
≥14 |
25-35% |
310/100 |
||
1000D/3 |
#8 |
Tex350 |
V346 |
0.8mm |
≥17 |
25-35% |
250/100 |
||
1260D/3 |
#7 |
Tex420 |
V415 |
1mm |
≥20 |
25-35% |
210/100 |